DIY wrapping paper rack

by | June 5, 2016 | Craft Room, crafts, How to's, Organization, Painting projects, Woodwork projects | 1 comment

The third and final room on the upper right side of the house is coming along nicely. We have deemed this last bedroom the Craft/Art room.  Oh and wrapping room.  Every wrapping station needs a wrapping paper holder.  Probably the easiest DIY project around.   And a super cute and a fun way to display all that fun wrapping paper.

For the holder we purchased 4 small backing pieces to secure it to the wall, two side pieces and 10 dowels.

For the two side pieces, one straight 1″ x 4″ x 8′ board was cut into two 42″ pieces at Lowes, and two 1″ x 2″ x 8′ whiteboard were cut to make four 42″ lengths for backers.  After letting the paint cure (Flirty Fuchsia by Sherwin Williams and a coat of PolyUrethane,) the backer pieces were mounted at studs just under 12″ apart (measuring exactly 42″ to the top, then we used a Kreg pocket hole jig to drill holes in the side pieces at the positions of the backers, and used a spade bit to drill holes for the dowels at 4″ intervals (top of dowel to top of dowel. The dowels measure just under 3/4″ and were stained gray.

The rack was mounted directly above the counter top space so that I could reach all the way to the top. So cute huh! A dedicated space just to wrap gifts. I even picked up extra scissors and tape that are on the side.

Stay tuned for more craft room updates including this cool worktop space.

xo
Cathleen

1 Comment

  1. Alia parker
    Alia parker on August 19, 2020 at 10:59 pm

    nice

    Reply

Submit a Comment

Your email address will not be published. Required fields are marked *